5/19/08 | Blitz Jewelry Care


Blitz Cleaning Products - Jewelry Making at Bloglander

The nice folks over at Blitz Manufacturing sent us a whole assortment of jewelry and metal cleaning products to try out. The company has actually been around since 1912, when they created their first jewelry cleaning cloth. Since then, they’ve expanded to include an enormous lineup of jewelry / metal cleaners, polishing cloths, jewelry cleaning machines, travel kits, and other jewelry care accessories. They’ve even branched out into non-jewelry cleaning items like musical instrument string cleaners and sporting good cleaners.

We were sent a travel kit, various cleaning cloths, several varieties of the wet cleaners and even a guitar string cleaning cloth. One nice part about the company is their dedication toward non-toxic and environmentally safe cleaning products - this is going to go along way in the future with all the concern over chemical and cleaner hazards.

I have to admit that we haven’t yet tried out the wet cleaners fully, but we have made some good use of the polishing cloths. We’ve used one of the double sided cloths from another company before and it worked fairly well. The Blitz Jewelry Care Cloth we used was at least as good, if not better. I feel like it loosened more of the tarnish.

The cloth is two pieces, one of which is impregnated with polishing agents and serves to loosen the tarnished areas on the metal. The other outer cloth is used to remove the tarnish and buff the surface of the metal to get a nice shine.

The cloth can be used on gold, silver, platinum jewelry. (Note there are several types of jewelry where the cloth is not recommended, such as pearls and opal. ) We tried it on several items including white gold and platinum rings and silver findings like clasps. It performed admirably on all items. I had a lot of difficulty taking “before and after” pictures which is what I usually like to do. I just was not able to show how well it cleaned. In particular, I used the cloth on my own wedding ring which has been through all sorts of crazy wear (I used to occasionally mix concrete with my bare hands with it on!) and it came out amazingly clean.

Below is a picture of a before and after on a standard silver lobster clasp on a silver chain necklace. The cloth instantly took off the tarnish.

Blitz Cleaning Products - Jewelry Making at Bloglander

We also tried out the non-aerosol Blitz Foamz Gem and Jewelry Cleaner which comes in a pump-action spray bottle. You just put your jewelry on something like a plate or other container and spray out some foam to cover it. Let it soak a bit, then wash it off.

Blitz Cleaning Products - Jewelry Making at Bloglander

We found this worked very well on items like silver and gold chain where the links were smaller. We had success using the cloth with these items too, but the wet cleaner seems to be able to get inbetween the chain links and other small areas more effectively. Again, it was difficult to take adequate before and after pictures of the items we cleaned. However, here is a picture of a heavily tarnished ring that we used the foam cleaner on:

Blitz Cleaning Products - Jewelry Making at Bloglander

So far, every cleaning product we’ve used from the company has been pretty spectacular. If you’re looking for a way to clean your jewelry, I’d suggest taking a look at some of their products. Their website also has various articles on how to clean your jewelry which are good reads.

Visit: Blitz Manufacturing - Non Toxic Metal and Jewelry Care